Conductive Level Switch Compact , LNK-K
| for conductive liquids (>10 mikroS) | |
| Electrodes | 4 up to 2000 mm |
| Connection | G 1/2 |
| hygenic mounting system (EHEDG) | |
| hygenic DIN 11851, Tri-Clamp, weld on sleeve | |
| Material | st.st. 1.4404, option: E-CTFE coating |
| Max. pressure | 10 bar |
| Max.temperature | 150°C |
| Option | head mounted transmitter f. 1 contact |
The conductive KOBOLD level probes LNK-K are used for level measurement. The electrical resistance between metallic vessel and level electrode is measured and evaluated. In combination with the KOBOLD LZE (p.119-124) or LZE-R (p. 125-128) weld-in sleeves, the probe provides a measuring point that has no dead space and meets hygiene standards and (EHEDG approval certificate). This level switch is therefore very well suited for CIP/SIP cleaning and because of its compact design the device is suitable for almost every measurement. The KOBOLD probes LNK-K are also available with integrated evaluating electronics. The output signal (24 VDC ) can thus be connected to a PLC for evaluation. This means lower installation costs, minimum wiring requirements and a high degree of noise immunity. The level probes are connected electronically through an M12x1 plug connection. Different stem lengths are available. The stem may also be E-CTFE coated, so that foaming media can be detected.